Hybrid inverter Victron Energy MultiPlus 12/1600/70-16 (1.6 kVA/1.3 kW, 1 phase, without MPPT)

Multifunctional sinusoidal inverter with a maximum output power of 1600 W. and with a battery voltage of 12 volts.

Uninterruptible Power Supply Device for AC Power
In the event of a malfunction in the electrical network or when power is cut off from the generator or AC network, the MultiPlus 12/1600/70-16 inverter will automatically turn on and “intercept” the power of the connected loads. This happens so quickly (less than 20 milliseconds) that gas boilers and heating systems continue to operate without interruption.

Some features
Unique power limiting feature

MultiPlus 12/1600/70-16 prevents overload of the current source, be it the electrical network or a gasoline power generator. You must adjust the current limit to prevent overloading the electrical network. If you have a 16A cut-off machine, you must limit the current consumption to 15A and then everything works automatically. At the first stage, the battery charging current is then the current consumption from the network will be automatically reduced to prevent overload. After which, Victron Energy MultiPlus 12/1600/70-16 will add the missing power using the battery. For example, MultiPlus 12/1600/70-16 can additionally add up to 1600 W. to the power that you have allocated and limited by machines at home.

Main characteristics
Power control/power amplifier: Yes
Three-phase and parallel operation: Yes
Transfer switch: 16 A

INVERTER
Input voltage range: 9.5-17V 19-33V 38-66V
Exit:
Output voltage: 230 VAC ± 2% Frequency: 50 Hz ± 0.1% (1)
Continued output power at 25°C(3): 1600 VA
Continued output power at 25°C: 1300 W
Continued output power at 40°C: 1100 W
Continued output power at 65°C: 800 W
Peak power: 2800 W
Maximum efficiency: 93/94/95%
No load power: 10/9/10 W
Power at no load in search mode: 3/3/3 W

CHARGER
AC input:
Input voltage range: 187-265 VAC. Input frequency: 45-65 Hz.
Charge voltage "absorption": 14.4/28.8/57.6 V
Floating charge voltage: 13.8/27.6/55.2 V
Storage mode: 13.2/26.4/52.8V
Home battery charge current: 70/40/20 A
Starter battery charging current: 1 A (12 V and 24 V models only)
Battery temperature sensor: Yes

GENERAL
Programmable Relay: Yes
Defense: a – d
VE.Bus communication port: for parallel and three-phase operation, remote monitoring and system integration.
(RJ45 splitter ASS030065510 is required for 500/800/1200 VA models)
Remote on-off: on/off
Internal DC fuse: 200/125/60A
General characteristics:
Working temperature. range: -40 to +65°C (fan cooling) Humidity (non-condensing): max. 95%

FRAME
General characteristics:
Material and color: Steel/ABS plastic (blue RAL 5012). Protection degree: IP 21.
Battery connection: 50/35/16 mm²
230 VAC connection: G-ST18i connector
Weight: 10.2 kg
Dimensions (H x W x D): 470 x 265 x 120 mm.

STANDARDS
Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN 62109-1.
Radiation immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6 - 3
Automotive Directive: ECE R10-5

Protection:
A. Output short circuit
b. Overload
V. Battery voltage is too high
d. Battery voltage is too low
e. Temperature too high
and. 230 VAC inverter output
d. Input voltage ripple is too high