Hybrid inverter Victron Energy MultiPlus 48/3000/35-50 (3 kVA/2.4 kW, 1 phase, without MPPT)

The Energy MultiPlus inverter is a compact device that has a wide range of functions, several inputs and outputs, as well as a programmable relay. MultiPlus inverters operate in single-phase and three-phase AC networks. Charger with multi-level automatic regulation of battery recharging.

Advantages of MultiPlus voltage inverters

The output voltage shape is a pure sinusoid;
Equipped with the “Power Control” function;
Equipped with the “Power Assist” function;
Equipped with the “Frequency shift” function;
Increasing system power with parallel connection of 5 inverters;
AVR: switching to battery operation within 20 ms;
The UPS function allows you to reduce the transition time to battery power to 4-6 ms;
Programmable relay and auxiliary output;
Two inputs for AC sources;
Two energy saving modes when there is no load;
Additional I/O ports;
The charger has 4 stages for different battery types;
Convenient setup by connecting to a PC;
Wide range of auxiliary equipment.

SPECIFICATIONS:
Parallel and 3-phase configuration - Yes
PowerControl / PowerAssist - Yes/Yes
AC input voltage (2x) - 187-265 V AC, 45 - 65 Hz (2 inputs)
Voltage range DC (12 / 24 / 48), V - 19 - 33
AC output - 230 V AC ± 2% 50Hz ± 0.1%
AC power at 25°C (VA) – (1) - 3000
Speaker power at 25 / 40°C (W) - 2500/2200
Peak power (W) - 6000
Max. Efficiency 12/24/48V (%) - 93/94
Power XX - 12 / 24 / 48V, (W) - 15/15
Power XX - load search mode 12 / 24 / 48V (W) - 4/5
Power XX - “AES” load mode 12 / 24 / 48V (W) - 10/10

Charger Specifications:
AC input voltage - 187-265 V AC, 45 - 65 Hz, Power factor: 1
“absorption” phase, V DC - 14.4/28.8/57.6
Phase “float” - 13.8/27.6/55.2
Support phase - 13.2/26.4/52.8
Maximum charge current, A - 120/70
Charge current for starter battery, A - 4, only for 12 and 24V models
Temperature sensor - standard
Voltage sense input - Yes

Main characteristics:
Programmable relay (2) -1x
Non-redundant output - 25
Defense (3) - A - G
VE.Bus communication port - For parallel and three-phase configurations, remote monitoring, system integration
Additional I/O ports - 1x
Remote Control On/Off - Yes
General characteristics - Operating temperature range: from -40 to +50 oC (cooling fan) Humidity (non-condensing): no more than 95%

Frame:
General characteristics - Aluminum (blue Ral 5012) IP21
Battery connection - 2x2 M8 bolt
230VAC connection - Screw terminals 13 mm2
Weight, kg - 19
Dimensions (HxWxD), mm - 362x258x218

Two AC inputs with built-in switch
The MultiPlus can be connected to two independent AC power sources, such as shore power and a generator, or two generators. The MultiPlus device will automatically connect to the active power supply.

Two AC output
The main output has uninterrupted functionality. In the event of a power failure, or when the shoreline or generator is disconnected, the MultiPlus device takes over the function of powering the connected consumers. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption. The second output is only active when AC is present at one of the Quattro's inputs. Devices that should not drain the battery, such as an air conditioner or water heater, can be connected to this output.

Unique Power Support Feature
The MultiPlus device will prevent overloading of a limited power AC source. In the first stage, the battery charge level will be automatically reduced to prevent overload. In the second stage, the device will amplify the output of the generator or shoreline power using the power drawn from the battery.

Virtually limitless power in parallel operation
To achieve higher output power, up to 6 MultiPlus devices can be connected in parallel. Operation in a split-phase or three-phase configuration is also possible.