Hybrid inverter Victron Energy Quattro 24/3000/70-50/50 230V

Hybrid inverter Victron Energy Quattro 24/3000/70-50/50 230V
Like the MultiPlus, the Quattro is also a combination inverter and charger. In addition, it can accept two AC inputs and automatically connect to the active source. Its many features include a true sine wave inverter, adaptive charging, PowerAssist hybrid technology, as well as many system integration features such as three-phase or split-phase operation and parallel operation.

Two AC inputs and two AC outputs
The Quattro can be connected to two independent AC power sources, such as shore power and a generator or two generators. Quattro will automatically connect to the active source. The main output has uninterrupted operation. In the event of a network failure, or loss of power from the shore or generator, Quattro takes over the power supply to the connected consumers. It happens so much quickly (less than 20 milliseconds) so that computers and other electronic equipment continue to operate without interruption. The second output is only active when there is AC current at one of the Quattro's inputs. Loads that should not drain the battery, such as an air conditioner or water heater, can be connected to this output.

Unique PowerAssist feature.
Quattro will prevent overloading a limited AC source such as a generator or shore power connection. Firstly, the battery charge will be automatically reduced if an overload would otherwise occur. The second level will increase the power of the generator or shore power source using the energy received from the battery.

Virtually unlimited power thanks to parallel operation
Up to 6 Quattros can be operated in parallel to achieve higher power output. Three-phase or split-phase is also possible. Please see our technical data to find out which models support parallel, three-phase and split-phase connection.

Remote monitoring and control
When combined with a GX device (such as the Cerbo GX), you can monitor and control your Quattro and system or systems locally (LAN) or remotely over the Internet from anywhere in the world using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for several operating systems. There's no limit to the level of control you can control, from customizing your Quattro to automatically starting your backup generator and more...

PowerControl/PowerAssist: Yes
Built-in gear switch: Yes
AC Inputs (2x): Input Voltage Range: 187-265 VAC Input Frequency: 45-65 Hz Power Factor: 1
Maximum through current (A): 2x50

INVERTER
Input voltage range (VDC): 9.5 – 17 V, 19 – 33 V, 38 – 66 V.
Output (1): Output voltage: 230 VAC ± 2% Frequency: 50 Hz ±0.1%
Continued output power at 25°C (VA) (3): 3000
Continued output power at 25°C (W): 2400
Continued output power at 40°C (W): 2200
Continued output power at 65°C (W): 1700
Peak power (W): 6000
Maximum efficiency (%): 93/94
No-load power (W): 20/20
No-load power in AES mode (W): 15/15
No-load power in search mode (W): 8/10

CHARGER
Charge voltage "absorption" (VDC): 14.4 / 28.8
Floating charge voltage (VDC): 13.8 / 27.6
Storage Mode (VDC): 13.2/26.4
Home battery charge current (A) (4): 120/70
Starter battery charging current (A): 4 (12 V and 24 V models only)
Battery temperature sensor: Yes

GENERAL
Additional output (A) (5): 25 50 50 50 50
Programmable relay (6): 3x
Defense (2): a-g
VE.Bus communication port: for parallel and three-phase operation, remote monitoring and system integration.
General Purpose com. port: 2x
Remote on/off: Yes
General characteristics: Operating temperature: -40 to +65°C. Humidity (non-condensing): max. 95%
Maximum altitude: 3500 m.

FRAME
General characteristics: Material and color: aluminum (blue RAL 5012). Protection category: IP 21.
Battery connection: four M8 bolts (2 positive and 2 negative connections).
230 VAC connection: 13 mm2 (6 AWG) screw terminals
Weight (kg): 19
Dimensions (HxWxD in mm): 362 x 258 x 218

STANDARDS
Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1.
Emissions, interference immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6 . -3
Road vehicles: 12V and 24V models: ECE R10-4.

1) Can be adjusted to 60Hz. 120V models available upon request.
2) Security key:
a) short circuit at the output
b) overload
c) battery voltage is too high
d) battery voltage too low.
d) the temperature is too high
e) 230 V AC at the inverter output
d) input voltage ripple is too high
3) Non-linear load, crest factor 3:1
4) Ambient temperature up to 25˚C
5) Turns off when there is no external AC power supply.
6) Programmable relay that can a.o. be tuned to general alarm,
DC Reduced Voltage or Generator Set Start/Stop Function
AC Rating: 230V/4A
DC Rating: 4A to 35VDC, 1A to 60VDC