Hybrid inverter Victron Energy Quattro 48/5000/70-100/100 (5 kVA/4 kW, 1 phase, without MPPT)
The Victron Quattro inverter is a compact device that has a wide range of functions, multiple inputs and outputs, and a programmable relay. QUATTRO inverters operate in single-phase and three-phase AC networks. Charger with multi-level automatic regulation of battery recharging.
Advantages of QUATTRO voltage inverters
The output voltage shape is a pure sinusoid;
Equipped with the “Power Control” function;
Equipped with the “Power Assist” function;
Equipped with the “Frequency shift” function;
Increasing system power with parallel connection of 5 inverters;
AVR: switching to battery operation within 20 ms;
The UPS function allows you to reduce the transition time to battery power to 4-6 ms;
Programmable relay and auxiliary output;
Two inputs for AC sources;
Two energy saving modes when there is no load;
Additional I/O ports;
The charger has 4 stages for different types battery;
Convenient setup by connecting to a PC;
Wide range of auxiliary equipment.
SPECIFICATIONS:
Parallel and 3-phase configuration - Yes
PowerControl / PowerAssist - Yes/Yes
AC input voltage (2x) - 187-265 V AC, 45 - 65 Hz (2 inputs)
Voltage range DC (12 / 24 / 48), V - 19 - 33
AC output - 230 V AC ± 2% 50Hz ± 0.1%
AC power at 25°C (VA) – (1) - 5000
Speaker power at 25 / 40°C (W) - 4500/4000
Peak power (W) - 10000
Max. Efficiency 12/24/48V (%) - 94/94/95
Power XX - 12 / 24 / 48V, (W) - 25/25/25
Power XX - load search mode 12 / 24 / 48V (W) - 5/5/6
Power XX - “AES” load mode 12 / 24 / 48V (W) - 20/20
Charger Specifications:
AC input voltage - 187-265 V AC, 45 - 65 Hz, Power factor: 1
“absorption” phase, V DC - 14.4/28.8/57.6
Phase “float” - 13.8/27.6/55.2
Support phase - 13.2/26.4/52.8
Maximum charge current, A - 200/120/70
Charge current for starter battery, A - 4, only for 12 and 24V models
Temperature sensor - standard
Voltage sense input - Yes
Main characteristics:
Programmable relay (2) -3x
Non-redundant output - 50
Defense (3) - A - G
VE.Bus communication port - For parallel and three-phase configurations, remote monitoring, system integration
Additional I/O ports - 2x
Remote Control On/Off - Yes
General characteristics - Operating temperature range: from -40 to +50 oC (cooling fan) Humidity (non-condensing): no more than 95%
Frame:
General characteristics - Aluminum (blue Ral 5012) IP21
Battery connection - 2x2 M8 bolt
230VAC connection - M6 bolt
Weight, kg - 30
Dimensions (HxWxD), mm - 444x328x240
Two AC inputs with built-in switch
The Quattro can be connected to two independent AC power sources, such as shore power and a generator, or two generators. The Quattro device will automatically connect to the active power supply.
Two exits alternating current
The main output has uninterrupted functionality. In the event of a power failure, or when the shoreline or generator is disconnected, the Quattro device takes over the function of powering the connected consumers. This happens so quickly (less than 20 milliseconds) that computers and other electronic equipment continue to operate without interruption. The second output is only active when AC is present at one of the Quattro's inputs. Devices that should not drain the battery, such as an air conditioner or water heater, can be connected to this output.
Unique Power Support Feature
The Quattro device will prevent overloading of a limited power AC source. In the first stage, the battery charge level will be automatically reduced to prevent overload. In the second stage, the device will amplify the output of the generator or shoreline power using the power drawn from the battery.
Virtually unlimited power with parallel work
To achieve higher output power, up to 6 Quattro devices can be connected in parallel. Operation in a split-phase or three-phase configuration is also possible.