Charge controller Victron Energy SmartSolar MPPT 75/10 (10A, 12/24V)
Charge controller Victron Energy SmartSolar MPPT 75/10 (10A, 12/24V)
A solar charger collects energy from solar panels and stores it in batteries. Using the latest and fastest technology, SmartSolar maximizes solar energy efficiency by delivering a smart charge in the shortest possible time. SmartSolar keeps batteries in good condition, increasing their lifespan.
The SmartSolar charge controller will charge even a very discharged battery. It can operate with battery voltages as low as 0 volts, provided the cells are not permanently sulfated or otherwise damaged.
MPPT: Ultra-fast maximum power point tracking
By continuously monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that the panels' available power is utilized to the fullest extent possible for storage in batteries. The benefits are especially obvious in partly cloudy environments. sky when the light changes frequently.
Remote monitoring and control
Remotely monitor and control a wide range of features on your SmartSolar MPPT charger with built-in Bluetooth by connecting it to your smartphone or other device via VictronConnect. If your installation is connected to the Internet using a GX device, the Victron Remote Management (VRM) portal provides access to the full power of your MPPT anytime, anywhere; Access to VictronConnect and VRM is free. For remote installations - even if there is no Internet connection nearby - you can still monitor your MPPT by connecting the GlobalLink 520.
Output loads
The intelligent Output Load function prevents the risk of battery damage due to complete discharge. You can set the voltage at which SmartSolar will turn off the load - thus preventing the battery from draining completely. And one more smart feature: SmartSolar will be try to ensure the battery is fully charged throughout the day. If this cannot be done - for example, in bad weather - the device will increase the load cut-off voltage day after day until the battery is fully charged during the day. We call this feature BatteryLife because it keeps your batteries healthy, extending their lifespan.
MAIN CHARACTERISTICS
Battery voltage (auto select): 12/24 V
Rated charge current: 10 A
Rated power PV, 12 V 1a,b): 145 W
Rated power PV, 24 V 1a,b): 290 W
Rated power PV, 48 V 1a,b): n.a.
Max. Short circuit current PV 2): 13 A
Automatic load shedding: Yes
Maximum open PV voltage: 75 V
Peak efficiency: 98%
Autonomous consumption - charge: 12V: 19 mA 24V: 16 mA
Autonomous consumption - write off: 12V: 10 mA 24V: 8 mA
Absorption charge voltage: 14.4 V / 28.8 V (adjustable)
Floating charge voltage: 13.8 V / 27.6 V (adjustable) Charging algorithm: Multi-stage adaptive
Temperature compensation: -16 mV/°C or -32 mV/°C
Max. constant load current: 15 A
Low Voltage Load Shutdown: 11.1V/22.2V/44.4V or 11.8V/23.6V/47.2V or Battery Life Algorithm
Connection of previously disconnected load: 13.1 V / 26.2 V / 52.4 V or 14 V / 28 V / 56 V or Battery Life algorithm
Protection: Output Short Circuit/Over Temperature
Operating temperature: -30 °C to +60 °C (full rated power up to 40 °C)
Humidity: 95%, non-condensing
Data Port: VE.Direct
FRAME
Colour: Blue (RAL 5012)
Power terminals: 6 mm² / AWG10
Protection category: IP43 (electronic components) IP22 (connection area)
Weight: 0.5 kg
Dimensions (h x w x d): 100 x 113 x 40 mm
STANDARDS
Safety EN/IEC 62109-1, UL 1741, CSA C22.2
SAVED TRENDS
Stored data Battery voltage, current and temperature, as well as load output current, photovoltaic
photovoltaic battery voltage and current.
Number of storage days trend data 46
1a) When connecting PV power supply with higher power, the controller will limit the input power.
1b) The PV voltage must exceed Vbat + 5V for the controller to start working.
Then the minimum PV voltage is Vbat + 1V
2) PV with higher short circuit current may damage the controller.