Charge controller Victron Energy BlueSolar PWM-LCD&USB 12/24V-10A (10A, 12/24 V)
Charge controller Victron Energy BlueSolar PWM-LCD&USB 12/24V-10A (10A, 12/24 V)
BlueSolar PWM-LCD&USB
Liquid crystal display
Two 5 volt USB outputs
Light control function, fully programmable
Three-stage battery charging (main, absorption, float), fully programmable
Load output with reduced voltage and manual shutdown (programmable)
Load output with overload and short circuit protection
Protection against connecting solar panels and/or batteries with reverse polarity
BlueSolar PWM DUO-LCD&USB
All the above features, plus:
Simultaneously charge two separate batteries
Programmable charge current ratio
External temperature sensor
MAIN CHARACTERISTICS
Battery voltage: 12/24V with automatic detection of system voltage
Rated charge current: 10 A
Automatic load shedding: Yes
Maximum solar voltage: 28V / 55V (1)
Autonomous consumption: < 10 mA
Load Output: Manual control + low shutdown voltage + timer
Protection: Battery Reverse Polarity (Fuse) / Output Short Circuit / Over Temperature
Overload protection:
Shutdown after 60 sec. at 130% load
Shutdown after 5 sec. at 160% load
Short circuit: instantaneous shutdown
Grounding: General positive
Operating temperature range: -35°C...+60°C (at full load)
Humidity (non-condensing): max. 95%
BATTERY
Absorption charge voltage: Factory setting: 14.4 V / 28.8 V
Float Charge Voltage (2): Factory Setting: 13.7 V [27.4 V]
Low Voltage Load Shutdown: Factory Setting: 11.2V / 22.4V
Connecting a previously disconnected load: Factory setting: 12.6 V / 25.2 V
USB
voltage: 5 V
Current: 2 A (both ports together)
FRAME
Protection class: IP20
Terminal size: 6mm²/AWG10
Weight: 0.15 kg
Dimensions (h x w x d): 96 x 169 x 36 mm
STANDARDS
Safety: EN60335-1, IEC 62109-1
EMC: EN 61000-6-1, EN 61000-6-3, ISO 7637-2
1) For 12V use 36 cell solar panels
For 24V use 72 cell solar panels and
cells in series
For 48V use solar panels 2 to 72
cells or 4 x 36 cells in series
2) The controller switches to lower float voltage
2 hours after reaching the absorption level.
As soon as the battery voltage drops below 13V, a new one will start
charging period.