Hybrid inverter Victron Energy Quattro II 48/5000/70-50/50 (5 kVA/4 kW, 1 phase, without MPPT)
Specifications:
PowerControl/PowerAssist: Yes
Built-in gear switch: Yes
AC inputs (2x): Input frequency: 45 – 65 Hz
Maximum current supply(A): 2x100
Inverter:
Input voltage range (DC): 38-66 V
Output (1): Output voltage: 230 V AC ± 2% Frequency: 50 Hz ± 0.1%
We'll have a long time. output power at 25°C (VA) (3): 5000
We'll have a long time. output power at 25°C (W): 4000
We'll have a long time. output power at 40°C (W): 3700
We'll have a long time. output power at 65°C (W): 3000
Peak power (W): 9000
Maximum efficiency (%):96
Power without loading (W): 18
No-load power in AES mode (W): 12
Power without loading in search mode (W): 2
Charger:
Charge voltage 'absorption' (W DC): 57.6
Charge voltage 'float' (W DC): 55.2
Storage mode (W DC): 52.8
Household battery charge current (A) (4): 70
Starter battery charging current (A): 4 (12 V and 24 V models only)
Battery temperature sensor: Yes
General characteristics:
Additional output (A) (5): 50
Programmable relay (6): 3x
Protection (2): a - g
VE.Bus communication port: For parallel and three-phase operation, remote monitoring and system integration
General purpose communication port: 2x
External switch: Yes
General characteristics: Operating temperature: -40 to +65˚C Humidity (non-condensing): max. 95%
Indoor unit:
General characteristics: Material and color: aluminum (blue, RAL 5012) Protection class: IP 21
230 V AC connection: M6 bolts
Weight (kg): 30
Dimensions (H x W x D in mm): 560 x 328 x 148 mm
Standards:
Safety: EN-IEC 60335-1, EN-IEC 60335-2-29, EN-IEC 62109-1
Emissions, immunity: EN 55014-1, EN 55014-2, EN-IEC 61000-3-2, EN-IEC 61000-3-3, IEC 61000-6-1, IEC 61000-6-2, IEC 61000-6 -3
Road transport: 12 and 24 V models: ECE R10-4
Inverter/Charger Quattro 3 kVA - 15 kVA - Li-ion battery compatible/
PowerControl – the ability to work with limited power of a generator, electrical network or power channel. Quattro is very powerful charger. Therefore, it draws a large amount of current from the generator or shore power (16 A at 5 kVA Quattro at 230 V AC). A current limit can be set at each AC input. The Quattro will also take into account the connected AC loads and use the remaining volume to charge the batteries, thus preventing the generator or shore power from being overloaded.
PowerAssist – increasing the power of the generator or shore power channel. This technology takes the PowerControl principle further, allowing Quattro equipment to increase the capacity of an alternative source. Since peak power is often only needed for short periods of time, Quattro will cover insufficient generator or power supply with battery power. When the load decreases, excess power will be used to recharge the battery.
Solar energy: providing AC power even without a power grid. Quattro can be used in network and off-grid modes when connected to solar panels and other sources of alternative energy. Loss of power from the network is recognized at the software level.